Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace and will usually fit into the frames of the past easily. If you have double glazed windows repair-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation, you will need to locate some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass repairs near me yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will keep drafts and water from getting into your home until a professional is able to repair the window. This will also provide a barrier to prevent any criminals from getting into your home. If the distance between the window and the door repairing (click to read) is significant, you may want to use a security screen that also has a window. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. As time passes, they may be affected by a variety of issues such as sagging. A sagging uPVC windows can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need open the window to get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after having moved your hinges. If you're happy with the fit, tighten the screws to ensure they remain in place.

If you can't reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles may also loosen. This is usually due to screws that have loosened over time, but it could also be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial fitting. The corners of the sash should align with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Based on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk is applied. When it comes to uPVC repair, you must be careful not to over-caulk. This will make your window more difficult to clean and lower its energy efficiency.

Check that any drainage holes do not have debris in them and ensure that the sill pan is properly angled to drain away from the local window repair. In more severe instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease, it may be the hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It is essentially a simple procedure, but it is easier to do when you have a person to help you hold the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or a faulty installation at the factory. Sending us photos via our website will often solve the issue. We are more than happy to provide advice.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again due to wear and tear could become misaligned. This can cause gaps to develop where the sash windows repair joins the frame. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. The interlock may be misaligned. This happens on the hinge's side and could require to be cleaned. In some cases it is possible to replace the hinges.

The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce the risk of draughts.

One of the most effective methods to reduce draughts is by using a draught excluder, these are typically made of fabric filled with some type of filler. They can be placed on the top of your windowsill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it could be cheaper to replace them rather than repair them. If you encounter any issues with your upvc window it is recommended to speak with a professional immediately.