Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They don't get rotten or rusty like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors repair is essential. This will save you from costly doors repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it can be relatively simple to replace windows, and the new one will usually fit inside the old frame very easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you start working on the glass, so that any shards will fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

It's a great idea tape the gap once the glass has been removed. This will keep drafts and water from getting into your home until a professional is able to fix the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they can suffer from a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act when you notice your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll need to open the window so that you can get to the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for an appropriate fit. If you're happy with the fit, you can tighten the screws until they stay in place.

If you aren't able to move the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles can also become loose. Often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively simple to lock repair a loose uPVC handle. First, you'll need to close the window and perform an initial test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature within your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

It is a fairly easy fix that can be done by any DIY expert. Depending on how severe the issue is, the old caulking might need to be removed. When it comes to uPVC repair, it is important to be careful not to over-caulk. This will only make your window harder to clean and lower its energy efficiency.

Make sure that the drainage holes do not have debris in them and that the sill pan is properly angled to drain away from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotted sills are also signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the home.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be repaired by a uPVC window repairs specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it blows open with a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part hinges are prone to wear out over time. It is essentially a very simple procedure, but it is easier if you have someone to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or by poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be happy to give you suggestions.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also lower the chance of windows sticking and help prevent corrosion. This should be done at least every year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges, also due to wear and tear could become misaligned. This causes a gap to form where the sash joins the frame. These can be easily repaired by giving them thorough clean, however when they're beyond repair, it may be necessary to get them aligned or replaced. Secondly the interlock, this is on the hinge side of the window, can also be misaligned, and again it is possible to just give them a clean but in some cases it might be necessary to get them replaced.

The next most common cause of draughts is the window seals, these can become worn down or damaged over time and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repair windows made of upvc will continue to provide excellent insulation and security for your home. It is crucial to keep in mind that all windows will eventually wear out and it may be more cost-effective to replace them rather than repair them. If you are experiencing issues with your upvc window it is recommended to speak with an expert immediately.