UPVC Window Handle Replacement

Replacing a damaged window handle is a relatively simple process and with the right tools it can be done quickly. It is important to know your type of handle and the spindle length before buying an alternative.

Older uPVC windows have handles with cockspurs, which have a spur that protrudes to the lock of a wedge cockspur striker plate. These can be left- or right-handed, and must be compatible when replaced.

What kind of lock or handle do I have?

There are many window and door replacement locks and handles made from upvc each with their distinct advantages and functions. The type of handle you are using will determine how easy it is to open your windows and if the locking mechanism works according to the plan. Over time and through regular use, window handles made of upvc may become damaged or worn out, rendering them less effective and secure. In some instances, they could even fall completely off. If you notice that your upvc window handles have fallen off, it is important to fix them as soon as you can. This will avoid burglaries and protect your home from burglary.

It is a good thing that replacing your upvc window handles is a fairly simple job that can be done by almost anyone. You'll require some basic tools, but with appropriate knowledge, it's an easy task that will only take a couple of minutes. To begin you'll need to determine the type of lock and handle you have on your window to help you identify the best replacement.

Inline Espagnolette Handles

They are typically located on the sides of the window. They have a flat design and feature a latch that connects to the locking mechanism of the window frame when it is turned. Inline upvc handles have a spindle running through the middle of the handle to the window frame to control the latch.

Cockspur Handles

These handles are usually found on older uPVC window replacements frames and feature an unusual hook-shaped design. Cockspur handles are held to the frame of the window with a single screw and are less secure than other kinds of window handle.

Handles that can tilt and turn

The tilt and turn handles differ from other upvc handles because they can be rotated to open the window and then lowered to the window to let air circulate. Generally, they have a 7mm spindle at the back of the handle and are available in left and right-handed versions.

When purchasing replacement handles made of upvc it is essential to check the spindle length because not all handles are identical in size. Drop something in the middle of the hole to test the length. This is the maximum spindle length that will be suitable for your window.

What is the spindle?

uPVC window handles operate in a similar way as doors, with the user turning the handle to operate a latch inside the frame. The window is then opened and closed. The handles could be damaged, particularly if they're used frequently or subjected to harsh conditions. It is possible to replace the handles on your uPVC window if they are not functioning correctly.

There are a variety of uPVC handles to choose from, including Espag, Cockspur and Spaded handles. They are designed to fit in the uPVC frames in a variety of ways. Each handle uses a specific spindle to lock the mechanism into the window. This is why it is crucial to know the kind of handle you have on your uPVC window to get the correct replacement for it.

You can determine the type of uPVC handle you have by taking a look at the base of your handle. There should be a "snap-in' cover over one screw that holds the handle's base in place. After removing this, you will be able observe the second screw that holds the base of the handle in place. After both screws have been removed, you should be able to pull the handle away from the uPVC window.

After you have removed the uPVC handle, carefully remove it from the locking mechanism. Note the length of the spindle. You'll need purchase a replacement with the same length as the handle that was originally used and the locking device.

The primary issue with window handles made of uPVC is that the handle spindle gets worn-out and is unable to longer work with the locking mechanism. This could be due to wear and tear from continuous use, a loosening of the locking mechanism or even corrosion that occurs over time. If this happens, you will need to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I get rid cost of replacement windows uk my old handle?

Window handles are susceptible to being damaged or broken over time. It is important to fix them as soon as possible to ensure your security. It is simple to replace a damaged or worn handle. The task can be accomplished in under one minute without the need for any special tools.

To remove the handle, first remove the screw that is located at the bottom of the handle. After this screw is removed, the handle will be removed from the base. There will be another screw located at the bottom of the handle's base and it is able to be removed too. After both screws are removed, the handle can be removed completely from the base portion of the window.

After removing the handle, align the fixing holes of the new handle with the existing holes in the window frame. If there is a cap or sticker on the new handle, remove it if necessary and then screw the handle in the appropriate position. Once the handle is in place it is essential to check that it works by turning the handle and ensuring that the lock mechanism activates.

Espag handles have a spindle that protrudes from the handle and slot into a multipoint locking mechanism inside the window frame. Cadenza windows feature an edge with cut-outs which slot into the lock mechanism while Cockspur handles have a long nose that is able to hook over either the frame's outer or the transom bar cross member inside the window.

Once you have the new handle in place, you can insert the spindle inside the lock inside the window and then tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle is fixed. The handle is now ready for use, so try opening and closing the window several times to ensure that it functions well and securely.

How do I put in the new handle?

It's not difficult to change the handle on your Upvc windows. The process is very easy. All you need is a screwdriver, and a bit of perseverance. First, ensure that the old handle is unlocked. Remove any visible screws. You could also replace them with screw caps. Once the handle is removed it is necessary to take a note of the length of the spindle that protrudes from the back of the handle. This is vital because it will determine the type of handle you need to buy.

Espagnolette handles made of uPVC are the most well-known type of handle. The spindle runs through the handle to operate the locking mechanism inside the frame of the window. When the handle is turned, it opens the latch on the window and allows it to open. In regular use and over time, handles made of espagnolette can become damaged.

Cadenza handles are a form of uPVC handle that is usually used in tilt and turn windows. They feature an elongated blade that functions as an interlocking mechanism that is multipoint within the window. They are more secure than espagnolette handle as they can only open from the inside. They can be replaced by the same procedure as espagnolette handles however you should make sure that the new handle has a curved blade instead of one that is flat.

Once you have selected the right handle, simply align the new handle to existing screw holes before fixing it with screws. Then, you should put the screws on and test your new handle. You can perform this by dragging the handle between the locked position to the unlocked a few time. If you encounter any issues, it may be worthwhile contacting a professional to see if they are able to assist you in solving the issue. They can provide advice on how to resolve the issue in a quick and efficient manner.