How to Program a Subaru Replacement Key

The dealer will charge to program a replacement key fob if you lose it or it ceases to work. It can be done for less by locksmith.

This is a common problem. The first thing to examine is the battery. Replace it with one that is the same size, type, and voltage as the original.

how do i find my subaru key code to Replace your Keys

If your Subaru has a smart key, or a transponder chip key, it requires that you go to the dealer to program it. If your Subaru has a non-transponder metal key, you could do it yourself with a little bit of work and a few tools most people will already have in their arsenal.

Open the case on the outside of the key fob using a metal screwdriver and a flathead key. Find the small tab at the seam between the front and back of the encasement that houses the key fob and then press it. This will release the interior smaller casing that houses the battery. You can open the casing using a screwdriver, and look for the new 2025 batteries within. Remove the old battery, and then insert the new one. Join the two sides back together.

Close all doors, excluding the driver's. Turn your key in the first position where the electrical system starts to turn on but the engine is off, and then return to the off position. You will hear a sound if you repeat this 10 times in rapid succession. After that you'll have 45 seconds to program the 8-digit serial number into the computer of your vehicle using the lock and unlock buttons on the driver's side door. The dome lights will flash to indicate confirmation of the program's success.

Remote Keys

A remote key is a remote control that can be used to start and unlock your car. It can also be used to operate the alarm system or lock and unlock doors, as well as open the trunk. It can be programmed using a key fob, or the mySubaru App. In certain states, you might need to get a new key and get it programmed to be in compliance with laws that require cars to be left running when parked.

There are many dealerships that offer remote start options, but this service isn't always affordable for everyone. Locksmiths can provide remote start services from your location. The downside of using locksmiths is that their costs are usually higher than those that dealerships charge.

Before you employ locksmiths who offer remote start services that are appropriate for your vehicle, make sure they're licensed and insured. It is also essential to confirm that they have the right tools to complete the task. This will ensure that the locksmith can program your keys correctly. If they are unable to do so it could cause problems in the future, when trying to start your car or locking yourself out. Be sure to verify that the emergency key they cut you works on the door cylinders as well as the trunk to avoid any issues in the future.

Transponder Keys

subaru legacy key fob cars are stocked with a range of helpful technology features that allow you to stay connected. STARLINK Multimedia allows you to stream music and content while driving.

The key fobs for subaru new Key fob cost Forester Outback Crosstrek WRX and STI contain a small chip which transmits a message to the engine computer in your car whenever you use them to unlock or start it. The chip is unique and has a code that is linked to a specific vehicle.

If you've lost your key fob or if it's not functioning properly, take it to an authorized locksmith or dealer who has a code to reprogram the chip to match your subaru legacy key. They'll also give you new keys that can work in the trunk and door locks, allowing you to still enter your car even if the battery in your key is dead.

If you're going to a locksmith or dealership make sure you tell them your vehicle's VIN (Vehicle ID Number) and the year. The VIN is located on the dashboard, in a prominent place. It can help the locksmith or dealership confirm that they have the right key fob and key to program your Subaru.

Keyless Entry

You can start your Subaru remotely if you own a Subaru that has keyless entry. This can be a big aid if you're looking to go on a hike without having to take your keys to the car, or if you're going out for a drive in the snow and want to warm the engine before heading out on the highway.

This feature is only available when you have an intelligent fob or replacement key. The procedure for programming it is simple and quick. You'll have to know the 8-digit number on your key fob. If you're unable to remember the number, note it down.

Once you've setup your pin code, you can unlock your car's doors with pressing the button on the key fob of your car or on your car's trunk release or lift gate locks. You can keep your keys in your car while you go on an excursion or take the children out to play. When you return, use the five-digit code unlock and get into the vehicle.

You can install keyless entry yourself in the event that you want to. However it is recommended to hire a professional to ensure that the system is installed correctly and is functioning as intended.